View SPF0004_8694757.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

v dss = 275 v , r ds(on) = 0.26 dual n-channel power mosfet SPF0004 data sheet SPF0004-dse rev.1.0 sanken elctric co.,ltd. 1 sep. 06, 2 01 6 http://www.sanken-ele.co.jp /en ? sanken electric co ., ltd. 2016 description SPF0004 includes two n-channel power mosfets with zener diode for esd protection. the package of SPF0004 isolates each mosfet, and has heatsink connected to each drain. features automotive qualified low on resistance esd protection zener on gate 100% avalanche tested compliant with rohs directive v dss ------------------------------------ 275 v (i d = 100 a ) i d --------------------------------------------------------- 6 a r ds(on) --------------- 0.26 max . (i d = 6 a , v gs = 10 v) t rr ------------------------------------------------ 117 ns (typ.) applications dc/dc converter other switched-mode power supply package hsop20 not to scale internal schematic diagram 35mm (1) ( 10 ) ( 11 ) ( 20 ) ( 11 ) ( 20 ) (1) ( 10 ) ( f 1) ( f2 ) d1 (f1) s1 (2 , 3 , 4) g1 ( 17 , 18 , 19 ) d1 : drain1 s1 : source1 g1 : gate1 d2 : drain2 s2 : source2 g2 : gate2 d2 (f2) s2 (7 , 8 , 9) g2 ( 12 , 13 , 14 )
SPF0004 SPF0004 - dse rev. 1.0 sanken elctric co.,ltd. 2 sep. 06, 2 01 6 http://www.sanken - ele.co.jp /en ? s anken e lectric c o ., l td. 2016 absolute maximum ratings unless otherwise specified, t a = 25 c parameter symbol test conditions rating unit drain to source voltage v ds s 275 v gate to source voltage v gs s 20 v continuous drain current i d 6 a pulsed drain current i d (pulse) p ulse width ? 100s duty cycle ? 1 % 30 a single pulse avalanche energy e as v dd = 49 v, l = 0.05 mh, i as = 40 a, v gs = +16 v, 1 3 v, r g = 1.5 k , unclamped, s ee figure 1 47.5 mj avalanche current i as 30 a power dissipation p d t c = 25 c 2.5 w drain to source dv/dt 1 dv/dt 1 v dd = 200 v, l = 0.035 mh, r g = , i dp = 30 a, v gs = +16 v, 16 v, d i/dt ? 125 $v s ee figure 2 5.6 v / n s peak diode recovery dv/dt 2 dv/dt 2 v dd = 200 v, l = 0.2 mh, i sdp = 30 a, see figure 3 8.5 v / n s peak diode recovery di/dt di/dt v dd = 200 v, l = 0.2 mh, i sd p = 30 a, see figure 3 220 a/ s operating junction temperature t j 150 c storage temperature range t stg 55 to 1 50 c thermal characteristics unless otherwise specified, t a = 25 c parameter symbol test conditions m in . t yp . m ax . unit thermal resistance ( junction to case ) r -& 4.7 c/w
SPF0004 SPF0004 - dse rev. 1.0 sanken elctric co.,ltd. 3 sep. 06, 2 01 6 http://www.sanken - ele.co.jp /en ? s anken e lectric c o ., l td. 2016 electrical characteristics unless otherwise specified, t a = 25 c parameter symbol test conditions m in . t yp . m ax . unit drain to source breakdown voltage v (br) dss i d = 100 $ , v gs = 0 v 275 v drain to source leakage current i dss v ds = 275 v, v gs = 0 v 100 a gate to source leakage current i gss v gs = 20 v 10 a gate threshold voltage v gs( th ) v ds = 10 v, i d = 1 m a 1.90 2.25 2.60 v forward transconductance r e(yfs) v ds = 10 v, i d = 6 a 2 0 >+ s static drain to source on - resistance r ds( on ) i d = 6 a, v gs = 10 v 0.20 0.26 input capacitance c iss v ds = 10 v v gs = 0 v f = 1 mhz 960 pf output capacitance c oss 250 reverse transfer capacitance c rss 36 turn - on delay time t d(on) v dd = 2 0 0 v i d = 6 a v gs = 10 v, r g = 10 refer to figure 4 15 ns rise time t r 34 turn - off delay time t d(off) 112 fall time t f 144 source to drain diode forward voltage v sd i s d = 6 a, v gs = 0 v 1. 2 v source to drain diode reverse recovery time t rr i sdp = 6 a di/dt = 100 a/s refer to figure 3 117 ns
SPF0004 SPF0004 - dse rev. 1.0 sanken elctric co.,ltd. 4 sep. 06, 2 01 6 http://www.sanken - ele.co.jp /en ? s anken e lectric c o ., l td. 2016 test circuits and waveforms (a) test circuit ( b ) waveform figure 1 unclamped inductive switching (a) test circuit ( b ) waveform figure 2 dv/dt strength (a) test circuit ( b ) waveform figure 3 diode reverse recovery time v d d i d v d s r g v g s 0 v l i dp i d v ( br ) dss v ds v dd 0 0 v dd i d v ds r g v gs 0 v l i dp i d v ds v dd 0 0 1 / 2 v dd dv / dt 1 25 a 20 a di / dt v gs 0 v i sd l d . u . t . v dd 0 i sd t rr di / dt i rm 90 % i rm 2 a 0 v ds i sdp v dd dv / dt 2 100 v 150 v
SPF0004 SPF0004 - dse rev. 1.0 sanken elctric co.,ltd. 5 sep. 06, 2 01 6 http://www.sanken - ele.co.jp /en ? s anken e lectric c o ., l td. 2016 (a) test circuit ( b ) waveform figure 4 switching time v ds v dd r g r l v gs 0 v pulse width = 10 s duty cycle ? 1 % i d t d ( o n ) t r t o n t d ( o f f ) t f t o f f 9 0 % 1 0 % 9 0 % 1 0 % v g s v d s 0 0
SPF0004 SPF0004 - dse rev. 1.0 sanken elctric co.,ltd. 6 sep. 06, 2 01 6 http://www.sanken - ele.co.jp /en ? s anken e lectric c o ., l td. 2016 ratings and characteristics curves figure 5 i d vs. v ds characteristics (typ.) figure 6 i d vs. v g s characteristics (typ.) figure 7 r d s(on) vs. t c characteristics (typ.) figure 8 r d s(on) vs. i d characteristics (typ.)
SPF0004 SPF0004 - dse rev. 1.0 sanken elctric co.,ltd. 7 sep. 06, 2 01 6 http://www.sanken - ele.co.jp /en ? s anken e lectric c o ., l td. 2016 figure 9 capacitance vs. v ds characteristics (typ.) figure 10 i d r vs. v sd characteristics (typ.) figure 11 v d ss vs. t c characteristics (typ.) figure 12 v th vs. t c characteristics (typ.)
SPF0004 SPF0004 - dse rev. 1.0 sanken elctric co.,ltd. 8 sep. 06, 2 01 6 http://www.sanken - ele.co.jp /en ? s anken e lectric c o ., l td. 2016 figure 13 p d vs. t c characteristics (typ.) figure 14 i d vs. t c characteristics (typ.) figure 15 dynamic input / output characteristics (typ.) figure 16 safe operating area
SPF0004 SPF0004 - dse rev. 1.0 sanken elctric co.,ltd. 9 sep. 06, 2 01 6 http://www.sanken - ele.co.jp /en ? s anken e lectric c o ., l td. 2016 figure 17 . e as vs. t c characteristics (typ.) figure 18 . transient thermal resistance p ulse width (s) transient thermal resistance ( c/w )
SPF0004 SPF0004 - dse rev. 1.0 sanken elctric co.,ltd. 10 sep. 06, 2 01 6 http://www.sanken - ele.co.jp /en ? s anken e lectric c o ., l td. 2016 physical dimensions ? hsop20 package notes: - dimensions in millimeters - lead treatment : pb - free ( rohs compliant) - when soldering the products, make sure to minimize the working time, within the following limits: reflow (msl 3) preheat: 170 to 190 c / 110 s solder heating: 220 to 250 c / 60s (3 times) soldering iron : 380 10 c / 3 .5 0.5 s , 1 time marking diagram a m agnified drawing of a (s=10/1) root of terminal from back side heatsink width without gate burr part number y m d d x s p f 0 0 0 4 lot number y is the last digit of the year of manufacture ( 0 to 9 ) m is the month of the year ( 1 to 9 , o , n or d ) dd is the day of the month ( 01 to 31 ) x is control number ( a to z ) s k
SPF0004 SPF0004-dse rev.1.0 sanken elctric co.,ltd. 11 sep. 06, 2 01 6 http://www.sanken-ele.co.jp /en ? sanken electric co ., ltd. 2016 important notes all data, illustrations, graphs, tables and any other information included in this document as to sanken? s products listed herein (the sanken products) are current as of the date this document is issued. all contents in this document are subject to any change without notice due to improvement of the sanken products, etc. please make sure to confirm with a sanken sales representative that the contents set forth in this document reflect the latest revisions before use. the sanken products are intended for use as components of electronic equipment or apparatus (transportation equipment and its control systems, home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). prior to use of the sanken products, please put your signature, or affix your name and seal, on the specification documents of the sanken products and return them to sanken. if considering use of the sanken products for any applications that require higher reliability (traffic signal control systems or equipment, disaster/crime alarm systems, etc.), yo u must contact a sanken sales representative to discuss the suitability of such use and put your signature, or affix your name and seal, on the specification documents of the sanken products and return them to sanken, prior to the use of the sanken product s. the sanken products are not intended for use in any applications that require extremely high reliability such as: aerospace equipment; nuclear power control systems; and medical equipment or systems, whose failure or malfunction may result in death or serious injury to people, i.e., medical devices in class iii or a higher class as defined by relevant laws of japan (collectively, the specific applications). sanken assumes no lia bility or responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third party, resulting from the use of the sanken products in the specific applications or in manner not in compliance with the instructions set forth herein. in the event of using the sanken products by either (i) combining other products or materials therewith or (ii) physically, chemically or otherwise processing or treating the same , you must duly consider all possible risks that may result from all such uses in advance and proceed therewith at your own responsibility. although sanken is making efforts to enhance the quality and reliability of its products, it is impossible to completely avoid the occurrence of any failure or defect in semiconductor products at a certain rate. you must take, at your own responsibility , preventative measures including using a sufficient safety design and confirming safety of any equipment or systems in/for which the sanken products are used, upon due consideration of a failure occurrence rate or derating, etc., in order not to cause any human injury or death, fire accident or social harm which may result from any failure or malfunction of the sanken products. please refer to the relevant specification documents and sanken ? s official website in relation to derating. no anti-radioactive ray design ha s been adopted for the sanken products. no contents in this document can be transcribed or copied without sanken?s prior written consent. the circuit constant, operation examples, circuit examples, pattern layout examples, design examples, re commended exampl es , all information an d evaluation results based thereon, etc., described in this document are presented for the sole purpose of reference of use of the sanken products and sanken assumes no responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third party, or any possible infringement of any and all property rights including intellectual property rights and any other rights of you, users or any third party, resulting from the foregoing. all t echnical information described in this document (the technical information) is presented for the sole purpose of reference of use of the sanken products and no license, express, implied or otherwise, is granted hereby under any intellectual property rights or any other rights of sanken. unless otherwise agreed in writing between sanken and you, sanken makes no warranty of any kind, whether express or implied, including, without limitation, any warranty (i) as to the quality or performance of the sanken products (such as implied warranty of merchantability, or implied warranty of fitness for a particular purpose or special environment), (ii) that any sanken product is delivered free of claims of third parties by way of infringement or the like, (iii) that may arise from course of performance, course of dealing or usage of trade, and (iv) as to any information contained in this document (including its accuracy, usefulness, or reliability). in the event of using the sanken products, you must use the same after carefully examining all applicable environmental laws and regulations that regulate the inclusion or use of any particular controlled substances, including, but not limited to, the eu rohs directive, so as to be in strict compliance with such applicable laws and regulations. you must not use the sanken products or the technical information for the purpose of any military applications or use, including but not limited to the development of weapons of mass destruction. in the event of exporting the sanken products or the technical information, or providing them for non-residents, you must comply with all applicable export control laws and regulations in each country including the u.s. export administration regulations (ear) and the foreign exchange and foreign trade act of japan , and follow the procedures required by such applicable laws and regulations. sanken assumes no responsibility for any troubles, which may occur during the transportation of the sanken products including the falling thereof, out of sanken?s distribution network. although sanken has prepared this document with its due care to pursue the accuracy thereof, sanken does not warrant that it is error free and sanken assumes no liability whatsoever for any and all damages and losses which may be suffered by you resulting from any possible errors or omissions in connection with the contents included herein. please refer to the relevant specification documents in relation to particular precautions when using the sanken products, and refer to our official website in relation to general instructions and directions for using the sanken products. all rights and title in and to any specific trademark or tradename belong to sanken or such original right holder(s). dsgn-a ez -16002

▲Up To Search▲

Price & Availability of SPF0004

	To Download SPF0004 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .